| total control | |
 |
take total control of satellite or AV sources from your desktop PC |
| new | ||
| MauveLink-IR-PC | ||
| The new MauveLink-IR-PC enables desktop PC users to take total control of centrally-located satellite receivers or other AV sources. |  |
|
| simple connectivity - all you need is a COM port and a spare cat.5 UTP cable to the comms room. No power required at the PC end. | ||
| hassle-free, high quality pictures - excellent picture quality regardless of cable length* and with zero impact on your data network | ||
| cost-effective - choose from hundreds of TV and radio channels for a fraction of the cost of an AV switch system. No need to install new coax cables either - uses your existing cat.5 UTP infrastructure | ||
| compatible - works with almost any infra-red controlled AV source and Windows 95/98/NT/ME/2000/XP | ||
 |
a compact 1 box solution at each end of the UTP cable is all that is required. A 4-user version is also available. Call us about the 19" rack mounted version | |
|
control via IP from any part
of the world - the MauveLink-IR-PC
system is based upon a client-server based control structure
that enables the hardware to be controlled by the machine to
which it is attached, or by The desktop 'virtual handset'
acts as the client, whilst the low-level device handler (which
controls the MLIR-PC hardware) acts as the server. The client
and server can be on separate machines provided there is some
form of It is also possible to have simultaneous local and remote control, to enable selection overrides and broadcast/multicast facilities. |
||
|
|
|
| video | composite baseband PAL/NTSC/SECAM. 1 volt, 75 ohms, phono connector, 40MHz nominal bandwidth |
| audio | stereo, 1V nominal, 10Hz to 30Khz, 3.5mm connectors |
| infra red | compatible with all common 38-40 KHz IR standards. other standards can be accommodated to order |
| cable | compatible with all RJ45-based 4-pair cable systems. e.g. cat.5, cat.5e, cat.6. Cat.3 may be used with reduced max. distance |
| *cable distance | 250 metres nominal |
| power | 12V DC, earth isolated power required at Tx end only. Uses 2.5mm DC power connector. <200mA current |
| dimensions | 66mm x 66mm x 27mm (Tx and Rx) |
